Sammy X-Press Installs into Metal Deck, Purlin, or Tubular Steel

The Sammy X-Press® System is designed to provide direct attachment of threaded rod in metal deck (22-16 gauge) and thin gauge purlin (18-16 gauge), while providing reduced installation costs in terms of time and materials. The X-Press Anchors eliminate the need for costly “armovers” in pipe hanging installations. Current methods offered for thin gauge purlin require use of a time-consuming retaining nut on the threaded portion of the fastener to prevent pullout and are not designed for use in metal deck. In many instances, access to the backside of the installed fastener is prohibited by panel liner or roofing insulation. Sammy X-Press® anchors deliver the performance installers require without the use of a retaining nut!

• Installs in seconds, saving time & installation costs
• Use in applications where access to the back of the installed fastener is prohibited. ie. Metal roof deck, tubular steel, or vapor barrier fabric
• Less jobsite material needed
• No retaining nut required
• Provides design flexibility
• The X-Press System has earned the 9R21 and 25ES UL Listing Approval

SAMMYS X-Press for Seismic Restraint

Structural attachment for installation of branch/end of line restraint using 3/8″ threaded rod. Used primarily in purlin, bar joist, or other steel structural members. These fastening systems provide a secure and economical attachment to the structure.

The SWXP 35 model provides upper structural attachment in a range of steel thicknesses, from 16 ga. through 1/8″. An expandable sleeve is included with each fastener, eliminating need for retaining nut.

FEATURES

• Structural attachment and restraint component combined; ready for selected rod
• Access to the back of fastener not required
• Does not require use of a retaining nut
• Quick and easy installation

BENEFITS

• Reduced installation cost
• Design flexibility
• Less on site material (GO GREEN)
• Less material coordination
• Aesthetically pleasing

SPECIFICATIONS FOR 3/8″ ROD

Restrained Pipe Size:   Up to Schedule 40 pipe 2″ or less

Max Length of Restraint Material:  See Maximum Horizontal Load Tables below.

Maximum Angle:  45° from horizontal

Material:  Carbon Steel

Screw Description:  1/4″-20 x 1-1/8″ with expandable sleeve

Finish:  Electro-Zinc

Testing:  Tested to GR-63-CORE Standard for performance in structural steel in seismic restraint applications as outlined for use in NFPA 13 (2007), 9.3 at an independent test lab. The calculated force used for the testing was equal to that found in a Zone 4 and an 8.4 Richter scale seismic event.

Listing for 3/8″ Rod:  UL 203 listed as pipe hanger File EX 5098 – SXP 35 (16 ga.) 0-90° from horizontal – 3-1/2″ Schedule 40 pipe UL 203A File EX 15565

SPECIFICATIONS FOR SWXP 35 FOR 3/8″ ROD

Restrained Pipe Size:  Up to Schedule 40 pipe 2″ or less

Max Length of Restraint Material:  See Maximum Horizontal Load Tables below.

Maximum Angle:  45° from horizontal

Material:  Carbon Steel

Screw Description:  1/4″-20 X 1-1/8″ with expandable sleeve

Finish:  Electro-Zinc (cap & screw)

Testing:  BX Report # R-1362

Listing:  UL 203 as a pipe hanger – UL 203A pending

To view our catalog pages, click here; and for our seismic performance tables, click here.  (will open a new tab)