Low profile architectural metal roof clips to steel purlin
Low profile architectural metal roof clips to wood supports
Low Profile Architectural Metal Roof Clip Fastener
The Low Profile Architectural Metal Roof Clip Fastener has a Sharp convex drill point that has precise cutting edges to improve drill performance with less effort. Its low profile pancake head style ensures proper installation of metal roof panels.
Diameter / Thread Form: 12-14
Head Style: Phillips Square-Driv Pancake (PSP)
Drill Point: Teks 3
Finish: Grey Specx
To view our catalog pages, click here; and for our full selection chart and performance tables, click here. (will open a new tab)
Low profile architectural metal roof clips to steel purlin
Low profile architectural metal roof clips to wood supports
1. A standard screwgun with a depth sensitive nosepiece should be used to install Teks. For optimal fastener performance, the screwgun should be a minimum of 6 amps and have a RPM range of 0-2500
2. Adjust the screwgun nosepiece to properly seat the fastener
3. The fastener is fully seated when the head is flush with the work surface
4. Overdriving may result in torsional failure of the fastener or strip-out of the substrate
5. The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread
6. New magnetic sockets must be correctly set before use. Remove chip build-up as needed
Finish: Gray Spex Coating. |
|||||||
| PART NUMBER | REFERENCE NUMBER | DESCRIPTION | HEAD STYLE | DRILL POINT | DRILL & TAP CAPACITY | MAX. MATERIAL ATTACHMENTS | BOX QTY |
| 1575553 | 1575553 | 12-14 x 1" | #2 PSD | #3 | .036-210 | 0.55 | 4000 |
